US Divers Tank Valve Seat #0501-09 - A192 generic

US Divers Aqua Lung K Valve Replacement Seat A192 Aqua Lung Part Number #0501-09

This is a replacement US Divers Tank Valve Seat. Fits Only K valves.

*Please note that the commonly available "reproduction valve seat" is near identical, but NOT perfect. The height is actually too tall, and you will find if you install that you will only get 3/4 of a full turn on handwheel. We have had to send out these seats and have a thread height removed by tool shop in order to get a full handwheel turn on the valve knob.

Choose

• A192 - standard generic reproduction seat un-cut full length
• 0510-09 - this has been shortened to exact height of original Aqua Lung seat

This is a Vintage Valve and not modern style - please see new valve kits for valves made 1990- current

On Diagram this is part #8 Seat Assembly or US Divers part #0501-09

Fits ONLY K valve #0530 - See Warning On J Valve Difference

J Valve Pack is again same size, however it has an important "hole in center" Failure to install the correct seat in each valve will lead to malfunction when in use. Meaning DEATH! may result.

Please only order parts if you are sure as we do not take returns on regulator parts or life support. If you have question on fit, please ask prior to order and we will try to make best answer. However realize that we have seen many-many examples of vintage regulators where parts have been mis-identified and mistakenly put into service. Just because a regulator has a part inside, does not meant that it was factory specific.